Baker's DIY
Baker's DIY

Zinsser have been making Paints & Specialised Primers in the USA since 1849. If you have a surface to paint that has a problem be it Water Stain, Graffiti, Fire Damage, Knots, Mould & Mildew, Nicotine Stains, Tannin Bleed, Zinsser will have a product for it.  123 Primer, BIN Primer, Cover Stain Primer and Perma White Anti Mould.

 Bulls Eye 1-2-3 is the classic universal interior and exterior water-based primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.


Bulls Eye 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for 'hard-to-stick to' surfaces, it offers excellent adhesion without sanding. Bulls Eye 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel.


Bulls Eye 1-2-3 is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job.


Bulls Eye 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. For oil and water stains, fire and smoke damage try the next generation Bulls Eye 1-2-3 Plus.


Bulls Eye 1-2-3 is rust inhibitive and ideal for new metal. It resists flash rusting in its “wet” state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface.


It has a quick 30 minute drying time and 1 hour 're-coat'. It can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money


Application information... approximate coverage of 10 m2 per litre, is hard dry in 35 minutes if applied correctly.


Cover Stain is the only oil-based interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.


On interior surfaces, Cover Stain dries quickly and has great hiding power providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.


Cover Stain is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money.


On exterior surfaces, Cover Stain has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood paneling and trim, where few oil-based primers can succeed. Cover Stain® resists cracking and peeling and is compatible with all decorative top coats.


Application Information... average coverage of 9.8 m2 per litre, touch dry 35 minutes if applied correctly.

B-I-N is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces.


 B-I-N offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more.


B-I-N permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, it may be used in areas where incidental contact with food items occur.


Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood.


Application Information.. average coverage of 12.5 m2 per litre, hard dry in 20 minutes if applied correctly. 

Perma-White is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years.


 Perma-White has proven its effectiveness against mould and mildew growth on the paint film in severe independent laboratory tests when exposed to combined strains of the most common and problem-causing mould and mildew spores in today’s environment.


Perma-White interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.


Perma-White bonds to existing solvent-based or glossy paints – even Formica and ceramic tile without sanding. Perma-White also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.


Perma-White Interior Eggshell Paint  - Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.


Perma-White Interior Satin Paint A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.


Application Information... Average coverage of 10 m2 per litre, touch dry in 30 minutes if applied correctly.


Not Sure What You Need? Contact us.


97 Bridgend Road



South Wales

CF32 9AP


Tel: 01656 724373


Opening times

Monday - Saturday:

9am - 5.00pm

Closed on Sundays & Bank Holidays


We're on Facebook

Visitor Counter

Print | Sitemap
© Bakers DIY